Inline Turbine Flowmeters

A turbine flow meter is a volumetric metering the meter consists of a rotor and bearing assembly Suspended on a shaft, which is mounted to a support device.

This assembly is mounted inside a housing of a calibrated internal diameter. As fluid passes through the flow meter housing, the rotor will spin at a rate proportional to the volume of liquid passing through the housing. A magnetic or modulated pick-off sensor is used to detect the passage of each rotor blade and generate a frequency output. The frequency output can be read directly with the end users electronics or further processed to convert to a linear analog flow Rate output.



  • Flow Range 2 to 4500 LPM
  • Line Size from ½” to 4 Inch
  • Measurement Accuracy of ±0.5% of measured value.
  • Repeatability ±0.05%.
  • Modular Meter Dual pick ups for greater accuracy.
  • Max. Static Pressure 350 bars.
  • Explosion proof Amplifier Assembly.
  • Pneumetic or electronic filling controls.
  • Meter Mounted & Remote displays.
  • Rugged Design & Reliable Functions.
  • Complete tailor made solutions to meet requirement.
  • Meters with Sanitary End connections & Specifications.
  • Versions with PTFE coated internals for corrosive applications.


  • Pharmaceuticals: Water, Injection water, Solvents. Clean Meters with Tri clamps.
  • Water Industry : Cooling Water, Treated Water, Waste Water, Drinking water, Irrigation water.
  • Food Industry : Hot water, Chilled water,Milk, DM Water, Boiler Feed Water, Alcohol, ENA, Beer, Soft drinks.
  • Automobiles: Gear oil, Engine oil, Coolent, Windshield liquid, Hydraulic oil, Aviation fuel, AIR, LPG, Diesel, Petrol, Defence, R & D, Navy & Ship Applications of conductive & non conductive liquids.